Ref No. : UE0017

The Atlas Copco Predator drilling system is a unique package that applies innovation and proven new technology to exploration and production drilling.

• Mast and substructure certified to API 4-F, 4th Edition.
• Handles Range II or Range III casing
• Clearance for up to a compact 11 in / 280 mm BOP stack
• CANbus drilling control and diagnostic system
• Handles Oil field external upset ”Bottleneck” drill pipe: 3 ½” to 5” OD, Range 2 and Range 3

2012 self-propelled Atlas Copco Predator Drill Specifications:

• Hours:  5,017
• Weight:  51,225 kg
• Deck Engine:  Single C-27 Caterpillar Deck Engine – 950 hp
• Hydraulic Carriage Feed System:  180 ft./min.
• Telescoping Mast – Licensed APO 4F, 3^rd Edition

• Range III Hydraulically Telescoping Tower

• Top Drive 

• High Torque Range – 30,000lbf-ft @ 0-90 rpm
• High Speed Range – 15,000 lbf-ft @ 0 – 180 rpm
• Spindle ID – 5 in.
• Hydraulically Actuated, Two Speed, Tilt Out, Top Head Drive Assembly rated 30,000 lbs. torque, 5″ ID Spindle

• Hook Load Capacity:

• Rated Capacity – 200,000 lb.
• 220 ft. Work Floor
• 44 in. Removable Table
• 5 in. Bare Table Opening
• 5 in. API Master Bushing
• Hands-free Breakout System – Hydraulic Slips & Roughneck
• Operator’s Control Station – On Work Floor or Drill Cabin

Carrier:

• Customer Carrier with Hydraulic Drive – 500 hp
• Fuller RTO F-14908LL 8 Speed Transmission.
• 69,000 lb. Tridem Rear Axles with Driver Controlled Inter-Axle with Differential Locks
• 44,000 lb. Tandem front axles
• 445/65R22.5 Tubeless Radial Steer Tires with i1R22.5/14 Ply Tubeless Radial Rear Tires
• ABS Braking with Low Profile Two Man Cab
• 150 Gallon aluminum fuel Tank

Sub-Structure Support System:

• 42″ Floor Opening, 27 lh” Table Opening, 17 1h” Slip Bushing
• Hydraulic Slips and Roughneck
• 10′ X 24′ X 8′ Work Floor
• 2 Ton Electric Floor Crane
• 3,000 PSI Air/Mud Piping
• Oilfield Night Light Package

Pipe Handler:

• Overall Length 54’6″
• Overall Width (Transport) 8’6″
• Overall Width (Deployed) 47’11″
• Overall Height 4’6″
• Estimated GVRW 40,000 lb.
• Lift Arm Capacity 8,000 lb.
• Drill Pipe Range 4” to 8”, 28 ft. to 45 ft.
• Casing Range 4” to 24″, 28ft to 45 ft.
• Storage 30 Pieces each side or 90,000 lb. maximum

Mud Pump Specification – HHF – 800 HP

• Rating of Pump: 800 HP
• Mud pump driven by motors: Cat C27 Engine Drive
• Mud pump driven by diesel: Yes
• Number / Make / Type of diesel engine: HHF -800, (CHINESE), CAT C27 Engine
• Maximum discharge: 627 GPM
• Suction fluid end make / type: HONG HUA (HH), I TYPE
• Discharge fluid end make / type: HH, I TYPE
• Working pressure: 3000 psi
• Test pressure: 3000 psi

Three Mud Tank Specification – 270 bbl’s

• Active Suction Mud pits: 3 pits
• Total capacity required: 270 bbls each
• Height: 2314, mm
• Width: 2100 mm
• Number of Agitators: 6
• Jetting / jet -gun lines :  6

Shale Shaker Specifications:      

• Model: GNZS703E-LW
• Vibration mode: Linear motion
• Capacity: 120m3/h(528GPM)
• Vibration Motor 2 x 1.72Kw (Italy OLI brand)
• Screen Qty: 3 pcs
• Screen Size L×W: 700x1250mm
• Screen Area: 63m3
• Adjust G Force: ≤7.5G
• Shake Feeding Height: 1850mm
• Weight :  1675Kg
• Dimension of Shaker: L×W×H:  2717×1998×1428mm

Drill Collars

• Six 8” Drill Collar 6 5/8 REG connection zipped for Slip 4M
• Six 8” Collar 6 5/8 REG range 2 connection zipped for slip
• Five Short Collar 5” HWDP Range 2 NC 46 c/w hardbanding                                                                                                            

Hammers

• Four 17 1/2” QL 120 Hammer Bits Modified for Retainer system
• Two Complete retainer H/D system for 13 1/2” Bit & Larger
• One Hammer Bit Chuck Modified for Retainer System
• One QL 200 Hammer

Included with the rig is a full contingency of spare parts, jars and fishing tools, subs, tongs, cement nubbins, water tanks.